Blue Polymer Water Meter Box Lid/Ring w/12.5" locking lid & Key for 18" Pipe

Description

Flat Meter Box Ring
and Locking Cover
Fits 18" I.D. Drainage Pipe or Meter Tile
Nicor Meter Box Ring with Trumbull Cover
for water meters in underground pits
This is a combination water meter pit ring and locking lid for use with 18" Drainage Pipe (Contech D-2000, Hancor or ADS N-12) or with 18" meter tile or PVC pipe (I.D. Range of 17.5" to 18.5"). Works with any single or double wall pipe. The ring slips over the pipe installed to ground level. The ring  can be drilled with holes to attach it to the pipe wall. The ring then uses a standard Nicor locking C-type round lid. This center lid has a key slot locking mechanism with pin type lock. A brass key for the lock is included. Center lids are marked as "Water", but these could also be used for underground electrical boxes septic tanks, access to sprinkler valves, pond or pool pumps, etc.
Excellent for installing water meters outside for protection from frost cold. Use inexpensive 18" pipe and make your meter pits any depth necessary and as needed. Polymer cover and ring. When use with Automatic Meter Reading transmitters,  the ring or lid can accept standard mounting brackets. With the bracket installed to the ring rather than the lid (see photos), the AMR wire won't get pulled if the lid is removed, but is still mounted as close to ground level as possible for optimal radio performance. This is a new unused salesman's sample, only one available.
Approximate Measurements of inner locking removable lid:
Outer Diameter of top - 12-1/2"
Inner Diameter (bottom) -  11-1/2"
Thickness of top lip/flange 1/2"
Overall Thickness - 1-1/2"
Industry standard small pentagon locking nut and worm gear (see our other listings for hand keys)
Approximate Measurements of Outer Flat Ring:
Outside Diameter of top flange - 19-3/8"
Clear opening with center lid removed - 11-1/2"
Top Flange thickness - 1/2"
Diameter of inner bottom - 17-3/8" (pipe I.D. inserted into must be at least this dimension)
Depth of bottom section - 1-7/8" (amount inserted into pipe)
Total Thickness bottom plus top flange - ~2-1/2"
Please note dimensions before ordering
Blue Polymer Ring
Polymer Center lid with Slotted Key Lock - WITH  BRASS KEY
Radio Transparent for Automatic Meter Reading Transmitters
Won't Rust
No Iron scrap value to attract theft like a metal lid
Light weight for shipping
Strong H20 traffic rating safe for driveways, sidewalks and lawn vehicles
Meets standards for walking traffic - anti slip & fall requirements
Slotted Key hole with pin type lock
. - Brass Key Included.
Blue Polymer Center Cover
Brass Locking Key included
Many under-lid mounting options and brackets for most  AMR/AMI radio transmitters or antennas (
available
separately)