-40%
ECO 20A/30A/60A USB 12V/24V LCD Solar Panel Battery Regulator Charge Controller
$ 15.72
- Description
- Size Guide
Description
20A 30A 60A Solar Charge Controller Solar Power System LCD Dispaly High efficiencyPackage Include:
1 PC 20A/30A/60A LCD Solar Charge Controller
1 PC English User Manual
SAFETY INSTRUCTIONS
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL
it is not suited for nickel metal hydride, lithium ions or other batteries.
4.The charge regulator is only suitable for regulating solar modules.
Never connect another charging source to the charge regulator.
PRODUCT FEATURES PRODUCT FEATURES
1.Build-in industrial micro controller.
2.Big LCD display.
3.Fully PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
LCD DISPLAY/KEY
SYSTEM CONNECTION
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the solar panel to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when de-installing!
An improper sequence order can damage the controller!
DISPLAY/KEY
As shown above, users can intuitively
understand
the battery voltage, battery
capacity, charging state,
discharge state
and so on from the main interface.
Press a button to open or close the load once, or to restore the normal program when an abnormal interface appears
UNUSUAL DISPLAY
High temperature protection
The controller built-in high temperature protection program, the interface that the controller has been overheating, the controller will stop and wait for the lower temperature and then restart, the user should reduce the charge and discharge current, do not mount the controller in a confined space, it should be installed in a well ventilated environment.
Low battery
voltage protection
T
he controller built-in low battery voltage protection program, this interface indicates the battery voltage is too low, the controller will cut off the load output and wait for the battery voltage rise to re-open the load. the user should reduce the discharge current, and pay attention to timely charge, so as not to damage the battery life.
TROUBLE SHOOTING
Situation
Probable cause
Solution
Charge icon not on when sunny
Solar panel opened or reversed
Reconnect
Load icon off
Mode setting wrong
Set again
Battery low
recharge
Load icon slow flashing
Over load
Reduce load watt
Load icon slow flashing
Short circuit protection
Auto reconnect
Power off
Battery too low/reverse
Check battery/connection
TECHNICAL PARAMETER
20A 12V 24V Solar Charge Controller
Battery voltage :
12V/24V auto
Charge current :
20A
Discharge current :
20A
Max Solar input :
<50V
Charge voltage :
13.7V
Discharge stop :
10.7V
Discharge reconnect :
12.6V
USB output :
5V/2A
Self-consume :
<15mA
Operating temperature :
-20~+60 ℃
Size/Weight :
138*85*30mm /150g
Install hole size :
124*50mm
30A 12V 24V Solar Charge Controller
Battery voltage :
12V/24V auto
Charge current :
30A
Discharge current :
30A
Max Solar input :
<50V
Charge voltage :
13.7V
Discharge stop :
10.7V
Discharge reconnect :
12.6V
USB output :
5V/2A
Self-consume :
<15mA
Operating temperature :
-20~+60 ℃
Size/Weight :
138*85*30mm /150g
Install hole size :
124*50mm
30A 12V 24V Solar Charge Controller
Battery voltage :
12V/24V auto
Charge current :
30A
Discharge current :
30A
Max Solar input :
<50V
Charge voltage :
13.7V
Discharge stop :
10.7V
Discharge reconnect :
12.6V
USB output :
5V/2A
Self-consume :
<15mA
Operating temperature :
-20~+60 ℃
Size/Weight :
138*85*30mm /150g
Install hole size :
124*50mm
30A 12V 24V Solar Charge Controller
Battery voltage :
12V/24V/36V/48V
Charge current :
30A
Discharge current :
30A
Max Solar input :
<50V
Charge voltage :
13.7V
Discharge stop :
10.7V
Discharge reconnect :
12.6V
USB output :
5V/2A
Self-consume :
<15mA
Operating temperature :
-20~+60 ℃
Size/Weight :
138*85*30mm /150g
Install hole size :
124*50mm
*all red color voltage X2 ,X4 while using 24V /48V system.
*Product specifications are subject to change without prior notice.
How to install it?
1.Connect the Battery
2.Connect the Solar Panels
3.Connected the Load
4.From Complete System
On Nov-09-20 at 22:38:05 PST, seller added the following information: