Solar Charge Controller PWM 12V/24V LCD Display Solar Charge Controller Multi

Description

Feature:
1. High Performance: Using industrial grade main control chip, high quality components to improve system performance, the highest conversion efficiency is up to 98%, ultra fast tracking speed to ensure tracking efficiency. The controller is 12V/24V automatic identification, compatible with 12V 24V system.
2. LCD Display: The controller has a large LCD display, and the charging and discharging parameters are adjustable. With power off memory function, the status and data can be clearly displayed, and the mode and parameter configuration can be easily switched. It is suitable for home, industry, and business.
3. Multiple Protection Functions: The controller's complete 3 stage charging management improves system efficiency and extends battery life. Built in multiple protection functions, over current, short circuit protection, open circuit protection, reverse connection protection, all of which are self recovery and do not damage the controller.
4. Input and Output: The controller has dual USB outputs, the maximum current is up to 25A, supports mobile phone charging, and uses dual for MOS anti backflow circuits with ultra low heat. The controller will heat up during operation, please pay attention to install the charge controller in a flat, well ventilated place.
5. Easy to Install and Operate: The charge controller should be connected to the battery first, then the solar panel, and finally the load! The disassembly sequence is opposite to the wiring sequence.
Specification:
Item Type: Solar Charge Controller
Material: Shell Plastic + Back Plate Iron
Product Color: Black
Total Length: Approx. 13.3cm / 5.2in
Total Width: Approx. 7cm / 2.8in
Total Width: Approx. 3.2cm / 1.3in
Display Length: Approx. 12.6cm / 5.0in
Display Width: Approx. 5cm / 2.0in
Product Weight: Approx. 157g / 5.5oz
Display Mode: LCD Screen
Voltage: 12V / 24V Automatic Identification
Applicable Solar Panels: 12V is suitable for 18V solar panels, 24V is suitable for 36V solar panels
Maximum Photovoltaic Voltage: 12V battery, up to 23V; 24V battery, up to 46V (up to 50V under no load)
Full Cut Off Voltage: 14.4 / 28.8V
Discharge Cut Off Voltage: 10.7 / 21.4V
Discharge Recovery Voltage: 12.6 / 25.2V
Charging Recovery Voltage: 13.2V / 26.4V
Light Controlled Turn On Threshold: Solar Panel 8V (light on delay)
Light-controlled Turn Off Threshold: Solar Panel 8V (light on delay)
Standby Current: ＜10MA
USB Output: Dual USB Output, 5V / 2.5A（）
Working Temperature: -35℃ to 60℃
Package List:
1 x Controller
1 x Manual
Note:
1. This controller is 12V/24V automatic identification. When installing for the first time, please make sure that the battery has enough voltage so that the controller can recognize the correct battery type. In order to protect the service life of the battery, once the battery voltage is lower than 8V, the solar controller will automatically shut down.
2. Install the controller as close to the battery as possible to avoid voltage drop caused by excessively long wires and affect normal voltage judgment.
3. This controller is only suitable for various VRLA batteries (including openings, seals, gels, etc.), please do not use it for other batteries (including lithium battery, NI‑MH battery, etc.).
4. This controller can only use photovoltaic panels as the charging source. Do not use DC or other power sources as the charging source.
5. The controller will generate heat when it is running. The operating temperature of the controller is ‑35°C to +60°C. Please be careful to install the controller on a flat, well‑ventilated .
6. The LCD display of this controller has an error of 0.2V‑0.3V, but this is normal.
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3.
T
he duties are buyers' responsibility
.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.
1. Any questions,
pls. contact us via ebay message or email us.
We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again beuse sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "
5
" in every area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
We will do our up most to exceed your expectations in customer service, communition and dispatching of your orders.