USA 12/24V 50A MPPT Solar Charge Controller Panel Battery Regulator Dual USB

Description

Note：
This controller is the MPPT solar controller, which is the new manufacturer that has been tested in batches in recent months! ! !
The shape of the controller is the same as the previous PWM controller but the function is different. Please mind carefully.
It is suggested that the customer ask us for the product manual before placing the order to make sure whether it is the MPPT controller they need. If you are not satisfied with it, please do not buy it.
This product is a simple MPPT controller, the price is cheap, not high-end multifunctional MPPT controller, please think twice before purchase!
USA 12/24V 50A MPPT Solar Charge Controller Panel Battery Regulator Dual USB
Note：
This controller is the MPPT solar controller, which is the new manufacturer that has been tested in batches in recent months! ! !
The shape of the controller is the same as the previous PWM controller but the function is different. Please mind carefully.
It is suggested that the customer ask us for the product manual before placing the order to make sure whether it is the MPPT controller they need. If you are not satisfied with it, please do not buy it.
This product is a simple MPPT controller, the price is cheap, not high-end multifunctional MPPT controller, please think twice before purchase!
SAFETY INSTRUCTIONS
1. The function of the controller is to protect voltage overshoot and overplay.
2. When the battery voltage is too low, the controller stops the output; after the solar panel is charged, the cell recovers to 12.6V.
3. 12.6V is the recovery discharge voltage.
4. The normal voltage of the controller is 10.7V to 13.7V. These two voltage fluctuations can be set manually.
If you have trouble in use, try adjusting the float voltage to 13.7V:
First, you need to press the MCU control button for about 3-4 seconds, and then there will be a management interface on the screen.
Second, you must press the add button on the screen until the voltage reaches 13.7V.
Finally, you need to press the MCU control button again, which will save the controller record data when the display does not flicker.
Features
-Automatic identification system voltage, 12/24V auto recognition.
-Humanized LCD display and double button operation of man-machine interface.
-Completed technical data for setup and modify.
-High efficiency intelligent MPPT 3-stage charging mode.
-The load control mode can be selected, the timer function can be reset for street light at night.
-Discharge capacity control.
-Discharge counter of ampere hour.
-Working storage function: record the total run time of system, record timers of error during running time, record times of full charged battery.
-Reliable over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection.
-Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.
-Roundly reverse connected protection.
-Solar panels, battery, solar charge controller positive poles are all connected together, adopting negative MOSFET in series control circuit.
Specifications
Current: 50A
Rated Voltage: 12/24V
Max.pv voltage: 50V
USB Output: 2.4A *2
Over Charge Current(V): 13.7V/*2 24V
Over Discharge Current(V): 10.5-11V/*2 24V
Temperature Compensation: -3mv/℃/cell
Empty Load Wastage: <45mA
Loop Voltage Drop: <200mv
Display: LCD Display
Charging Type: MPPT
Waterproof Grade: IP32
Material: Plastic
Color: Black + Orange
Size:  21 * 19.2 * 4cm(50A)
Payment
We accept Paypal only.
Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location. If you require another company, please contact us.
Returns
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Greennnmood
Hand Tools
Control Module
Shop Category
Store Home
CNC
◈  Edge finder
◈  Drill Bits
◈  Spring Collet
◈  Boring Bar
◈  Mandrel
◈  Collet Chuck
◈  Blade
◈  Pull Stud
◈  Quick Change Tool Post
◈  Drill Chuck
◈  Drill Chuck Arbors
◈  live center
◈  vise
◈  Milling Arbor
◈  Reamer
◈  Blocks
◈  other
Hand Tools
◈  Rivet Gun
◈  Wrenches
◈  Hydraulic Crimper
◈  Balance Level
◈  Drill Bits
◈  Outside Micrometer
◈  Casters
◈  Steel Tape Measure
◈  Other
Metalworking Supplies
◈  Sanding Disc
◈  Metal Cut Off Wheels
◈  Flap Discs
◈  Hose Clamp
◈  Welding Wire
◈  Cable
◈  Piston Driver
◈  Other
Generator Accessories
◈  Automatic Voltage Regulator
◈  Generator Carburetor
◈  Other
Industrial Control Module
◈  PLC
◈  Control Valves
◈  Roller Chain
◈  Other
Other
Hot Item
ER11/ER16/ER20/ER25/ER32/ER40 Spring Collet Set For CNC Milling Lathe Machine
USD 10.99
New 50pcs 1" PEX Stainless Steel Clamp Cinch Ring Crimp Pinch Fitting Tubing
USD 11.59
4" Earth Auger Drill Bits for Gas Powered Post Fence Hole Digger
USD 22.40
AVR SX460 Automatic Voltage Volt Regulator Replacement For Stamford Generator
USD 19.10
4" 6" 8" 10" 12" Earth Auger Drill Bits for Gas Powered Post Fence Hole Digger
USD 22.40
New List Item
100 Pack 4-1/2"x.040"x7/8" Cut-off Wheel - Metal & Stainless Steel Cutting Discs
USD 50.14
20 PACK PREMIUM ZIRCONIA FLAP DISC SANDING GRINDING 4.5''x 7/8'' 100 GRIT
USD 28.59
4" Poly Strip Disc Wheel Paint Rust Removal Clean For Angle Grinder 10Pcs
USD 29.88
40 GRIT PACK 20 PREMIUM ZIRCONIA FLAP DISC SANDING GRINDING 4-1/2" X 7/8"
USD 34.89
2-Inch x .092-Inch Full Round Head Wire Coil Siding Nail Ring Shank 3600 Count
USD 57.99
USA 12/24V 50A MPPT Solar Charge Controller Panel Battery Regulator Dual USB
Note：
This controller is the MPPT solar controller, which is the new manufacturer that has been tested in batches in recent months! ! !
The shape of the controller is the same as the previous PWM controller but the function is different. Please mind carefully.
It is suggested that the customer ask us for the product manual before placing the order to make sure whether it is the MPPT controller they need. If you are not satisfied with it, please do not buy it.
This product is a simple MPPT controller, the price is cheap, not high-end multifunctional MPPT controller, please think twice before purchase!
SAFETY INSTRUCTIONS
1. The function of the controller is to protect voltage overshoot and overplay.
2. When the battery voltage is too low, the controller stops the output; after the solar panel is charged, the cell recovers to 12.6V.
3. 12.6V is the recovery discharge voltage.
4. The normal voltage of the controller is 10.7V to 13.7V. These two voltage fluctuations can be set manually.
If you have trouble in use, try adjusting the float voltage to 13.7V:
First, you need to press the MCU control button for about 3-4 seconds, and then there will be a management interface on the screen.
Second, you must press the add button on the screen until the voltage reaches 13.7V.
Finally, you need to press the MCU control button again, which will save the controller record data when the display does not flicker.
Features
-Automatic identification system voltage, 12/24V auto recognition.
-Humanized LCD display and double button operation of man-machine interface.
-Completed technical data for setup and modify.
-High efficiency intelligent MPPT 3-stage charging mode.
-The load control mode can be selected, the timer function can be reset for street light at night.
-Discharge capacity control.
-Discharge counter of ampere hour.
-Working storage function: record the total run time of system, record timers of error during running time, record times of full charged battery.
-Reliable over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection.
-Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.
-Roundly reverse connected protection.
-Solar panels, battery, solar charge controller positive poles are all connected together, adopting negative MOSFET in series control circuit.
Specifications
Current: 50A
Rated Voltage: 12/24V
Max.pv voltage: 50V
USB Output: 2.4A *2
Over Charge Current(V): 13.7V/*2 24V
Over Discharge Current(V): 10.5-11V/*2 24V
Temperature Compensation: -3mv/℃/cell
Empty Load Wastage: <45mA
Loop Voltage Drop: <200mv
Display: LCD Display
Charging Type: MPPT
Waterproof Grade: IP32
Material: Plastic
Color: Black + Orange
Size:  21 * 19.2 * 4cm(50A)
Payment
Shipping
Returns
Contact Us
We accept Paypal only.
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location. If you require another company, please contact us.
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
All rights reserved.